Water damage is a terrible thing to go through; however, it helps to know that Plumbers FL Services will be there quickly and efficiently when needed. Christian and Carlos make a great team. They are friendly, polite, and hard working. They are a credit to the Plumbers FL, and I’m glad they were here to help me. Thank you Christian and Carlos and the Plumbers FL crew. I always call Plumbers FL, and recommend their services to neighbors and friends. Thank you.
We have used Plumbers Florida many times in the past. The technicians are always pleasant, professional and do outstanding work. Our last experience was with William who went above and beyond our expectations. His communication skills and advise were spot on. As well as just a really, really nice man!!!
MAKE SURE THAT YOU TURN THE IGNITION ON BEFORE CHECKING RESISTANCE ONT HE SENSOR CONNECTORS
In this video i will help you figure out where the problem is coming from. If you have the ABS and Traction OFF lights on your dash you either have a bad hub speed sensor or a bad wire connector to the speed sensor.
Best way to figure out where the problem is coming from is to scan for ABS codes, if you do not have an ABS scanner auto parts stores such as Auto Zone will scan for those codes for free.
Once you get the codes you will know which sensors are coming up as bad. If, for an example you have a bad front passenger side speed sensor code, first thing you need to do is jack the car up, take both front wheels off, turn the ignition ON and get the reading from the good side connector that leads from the ABS control module to the speed sensor and then get the reading from the bad side connector. If the readings are the same, that means that your hub/speed sensor is bad, go ahead and replace it and that will solve your issue. If the readings are different, then your wiring is the issue.
This worked for me, i had bad wiring on the passenger side of the car and a bad hub/speed sensor on the rear driver side. You cannot tell if the wiring is bad just by looking at it, get a multimeter and measure the resistance on the connectors that will tell you all that you need to know.
ANOTHER THING THAT I COMPLETELY FORGOT TO MENTION IN THE VIDEO IS, IF YOU BY SOME CHANCE GET ALL 4 SPEED SENSORS TO COME UP AS BAD THERE IS A GOOD CHANCE YOU HAVE A BAD ABS MODULE OR A LOOSE CONNECTION AT THE ABS MODULE. THIS IS HOWEVER VERY RARE, BUT IT DOES HAPPEN.