What Our Customers Are Saying

Water damage is a terrible thing to go through; however, it helps to know that Plumbers FL Services will be there quickly and efficiently when needed. Christian and Carlos make a great team. They are friendly, polite, and hard working. They are a credit to the Plumbers FL, and I’m glad they were here to help me. Thank you Christian and Carlos and the Plumbers FL crew. I always call Plumbers FL, and recommend their services to neighbors and friends. Thank you.


We have used Plumbers Florida many times in the past. The technicians are always pleasant, professional and do outstanding work. Our last experience was with William who went above and beyond our expectations. His communication skills and advise were spot on. As well as just a really, really nice man!!!

Water Shut Off Systems Hillsboro Beach
Call Us: 727-228-3350

How to assemble and install a Pura UV Disinfection System.
FREE SHIPPING CANADA Discount Pricing here http://thewaterfilterestore.com/products/uv-dynamics-double-mount-top-plate-2-20-standard-sumps-part-mr320e-tp2s-220
Get a FREE REPORT on the 10 Biggest Mistakes made when purchasing water treatment equipment and how
you can avoid them. http://thewaterfilterestore.com/ or http://thewaterstoremidland.com
Share this video

For more great information about water treatment, subscribe! https://www.youtube.com/user/WaterStoreMidland

This video by Gary the Water Guy explains How to assemble and install a Pura UV Disinfection System.

The installation location needs to be considered carefully as this unit can only be installed horizontally, after your pressure tank but before the water splits off to your hot water heater and other fixtures. If you have an outside hose bib, if possible, the pipe servicing the hose bib should come off before the Ultra Violet System to maximize filter life through the system and not waste capacity on the water used for watering the lawn. The other installation parameter that needs to be considered is that you will need at least 20″ of space above and 20″ below to facilitate bulb and filter changes as well as routine maintenance.
Start by assembling the UV System
1. Remove the sumps from the UV Head and set aside.
2. Remove Quartz Sleeve from packing tube. Do not touch sleeve with bare hands. While holding middle of quartz sleeve with one hand, slide
protective bag with other hand to expose open end. Prepare quartz sleeve by lightly sanding outside edge. Warm o ring with a heat gun or blow dryer for 1 minute. When handling the quartz sleeve do not touch it with your bare hands, handle with a cloth or protective bag.
3. Apply even pressure to push the quartz sleeve into the UV head. To avoid breakage, make sure quartz sleeve goes in straight by pushing it with a slight twisting motion. As quartz sleeve passes both “O” Rings, resistance will be felt. Remove protective bag from quartz sleeve. Re install stainless steel Channeling Sleeve and Sleeve Gasket and sump to protect quartz sleeve.
4. Re install sumps for sediment and carbon filters with cartridges in place, making sure to moisten o rings.
5. NOTE: When handling, hold UV lamp by ceramic ends only. Do not touch glass. Remove UV Lamp from packing tube.
6. Connect UV lamp into four-pin socket located at the bottom of UV control module.
7. Carefully insert the UV control module with UV lamp through mounting bracket into the quartz sleeve and tighten 4 screws to depress safety plunger.
8. Install in line into plumbing after the premises pressure tank but before water branches off to hot water heater. Be sure to install a shut off valve before and after UV system for maintenance purposes. Any plumbing supply store can supply fittings from your plumbing to the 3/4″ threaded female connection at either end. The water needs to enter the end with the sediment filter (left side) and exit the side with the UV
Bulb (right side).
UV System Start up
1. Plug system into an electrical outlet. If the LED Indicator does not light up within one minute, verify UV lamp is securely plugged into UV control module and safety plunger rod is in place.
It is normal for the LED indicator to flicker slightly, system takes 1-2 minutes warm up time for UV bulb to shine at full strength.
2. Turn on water supply and check for leaks.
3. Flush system, connectors, and water lines for several
minutes to remove carbon fines.
4. Disinfect before use. See our video on How to Disinfect the Plumbing in Your Home at http://www.waterstoresgroup.com/blog/2012/02/how-to-disinfect-the-plumbing-in-your-home/ before drinking the water.
NOTE: When an ultraviolet water treatment system is unused for several hours, water within system could become warm. This is a normal condition.

For more great information about water treatment, subscribe! https://www.youtube.com/user/WaterStoreMidland
http://thewaterfilterestore.com/ or http://thewaterstoremidland.com

Follow me

Please comment or ask questions below.

Average Rating

Contact Details
Contact Information
Call Us Today: 727-228-3350
Call Us Today: 727-228-3350
Click Here For A FREE Estimate Today!